Four satellites for Earth

November 2010 :
First SPOT 6 equipment arrives in the cleanroom

-

The arrival of the SPOT 6 mechanical structure at Astrium Toulouse in November 2010 marks the start of the satellite integration phase. In a year, it will be fully assembled and ready for thermal, electromagnetic and stress tests as well as tests in the conditions of space.

 

- -
- - - -
- Spot 6&7 and Pléiades 1& 2 satellites | Spot Image -
- -
- - - -
Spot 6&7 and Pléiades 1& 2 satellites | Spot Image

First telescope complete
-

Integration and adjustment of the first of the two SPOT 6 telescopes is already complete.
It is now at the test phase, where its optical and electronic performance is measured. The optical assembly is based on a Korsch telescope with an aperture diameter of 200 mm.

 

- -
- - - -
- SPOT 6 telescope - Spot Image -
- -
- - - -
SPOT 6 telescope - Spot Image

-
- - - -
- SPOT6 propulsion module - Spot Image -
- -
- - - -
SPOT6 propulsion module - Spot Image

-
-
Batteries and propulsion module
-

 

 

Other equipment is already available for integration with SPOT 6, such as the batteries and the mono-propellant propulsion module, which will allow the satellite to maintain its orbit.
The rest of the equipment will be progressively delivered through to autumn 2011. Each piece will be assembled on the SPOT 6 mechanical structure, as it arrives.


- - - -
- Pléiades is a new generation of wide-swath (20 km) optical Earth-imaging satellites that will supply colour products at a resolution of 50 cm. -
- -
- - - -
Pléiades is a new generation of wide-swath (20 km) optical Earth-imaging satellites that will supply colour products at a resolution of 50 cm.

-
-
- - - -
- SPOT 6 and SPOT 7 form a constellation of Earth-imaging satellites designed to ensure continuity of high-resolution wide-swath data until 2023. -
- -
- - - -
SPOT 6 and SPOT 7 form a constellation of Earth-imaging satellites designed to ensure continuity of high-resolution wide-swath data until 2023.

-
Top